• Welcome to MacSailing.net!
  • Dedicated to sailing!
  • Be Jolly!
Hello There, Guest! Login Register


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Title: Using an AIS transponder with MacENC
#1
An AIS transponder can be used as the GPS source for MacENC.

1) Connect AIS Transponder to Mac. Disconnect any other GPS receiver. Be sure to install any USB to Serial software driver for the adapter in use.

2) Launch MacENC from the "Applications" folder.

3) Select "Connect" on the "AIS/RADAR" menu.

4) Select "Settings" button to open Settings drawer.

5) Uncheck "Use GPS Port".

6) Uncheck "Use Instruments Port".

7) Select the Port of the AIS transponder (i.e. KeySerial1, usbserial-xxxx).

8) Select Rate to 38,400.


To see Own vessel info in the GPS panel:

1) Select "Connect" on the "GPS" menu.

2) Select "Settings" button to open Settings drawer.

3) Select "Type" as "IP Only".
Scott Dillon
Sydney Australia
North Shore 38
CYCA
 
  


Possibly Related Threads…
Thread Author Replies Views Last Post
  Tech Note on how to use DigitalYacht AIT1000 Transponder/GPS Receiver GPSNavX 0 3,677 November 4, 2010 08:40
Last Post: GPSNavX

Forum Jump:


Browsing: 1 Guest(s)