MacSailing.net

MacSailing.net > MacSailing.net > MacENC & GPSNavX > Transfering routes to Raymarine C-80
Full Version: Transfering routes to Raymarine C-80
You're currently viewing a stripped down version of our content. View the full version with proper formatting.

nwsailor

January 29, 2008 17:55
Has anyone any experience transfering, via a CF card, a route created on GPSNavX to a Raymarine C-80?

The concept seem simple but GPSNavX has three options of transfer to files and I am not sure if any are compatible with the Raymarine system.

Any thoughts or experience?

Thank you

GPSNavX

January 29, 2008 18:47
GPSNavX can transfer waypoints to your Raymarine C-80 over the NMEA serial cable. Set the type to 'Other' in the GPS panel Settings drawer.

If Raymarine can support either the standard GPX or KML format then you might be able to use the CF card to transfer waypoints.

ReeferJon

January 31, 2008 01:17
If the Raymarine expects a file format other than GPX or KML, you could look at GPSBabel, which converts between waypoint formats.
GPSBabel Site

MacSailing.net > MacSailing.net > MacENC & GPSNavX > Transfering routes to Raymarine C-80