is iNavX compatible to SEAMate1A®Lite? - Printable Version +- MacSailing.net (https://macsailing.net/mybb) +-- Forum: iPhoneSailing.net (https://macsailing.net/mybb/forum-14.html) +--- Forum: iNavX (https://macsailing.net/mybb/forum-15.html) +--- Thread: is iNavX compatible to SEAMate1A®Lite? (/thread-1219.html) |
- Skipper - August 6, 2010 I found this seemingly interesting device and was wondering if it is compatible to iNavX. http://www.seamate.dk/index.php?option=com_content&view=article&id=4%3Aseamate-1a-lite-produktark&catid=2&Itemid=2&lang=en It might render a laptop obsolete. - GPSNavX - August 6, 2010 I have seen that device before, but never tested it and the website seems to be lacking in detail. If it can broadcast the received NMEA data via TCP/IP it will work just as the DigiConnect Wi-SP works. - isail - September 16, 2010 I almost tried it this summer but ended up going with a regular Wifi router and Navmonpc (freeware) since we already have a PC running AIS, Chartplotter etc. From the discussions I had with the rep the Seamate should work. My main reason (apart from cost) for avoiding the Seamate/DigiConnect solutions is that you give up your Internet connection while connected to them. I'd be much more interested in an NMEA-Ethernet box that I could connect to a 3G Router. Sure, that leaves me with two boxes, but gives more flexibility and adds functionality. The 3G routers are getting cheap, but I don't know about the NMEA->Ethernet devices (don't even know of any). - Ubbink - October 10, 2010 I have the seamate lite, but not yet succeeded in receiving the data from it. I contacted the manufacturerbut they couldn't help me out, though they informed me that they just bought an Ipad to check. I hope to hear from them soon.. - schoesler - January 29, 2011 I dó have a Seamate 1A and looking forward to see an how to do :-) Jan - GPSNavX - January 29, 2011 Yes I am also eager to hear about the Seamate 1A working with iNavX. I recommend the Brookhouse iMux or the DigitalYacht iAIS unit. - GPSNavX - June 14, 2011 The distributor finally sent me one, but I get the impression the product is going to be discontinued. None the less I will put together a setup guide which will be linked in the iNavX help. - GPSNavX - June 15, 2011 SeaMate1A configuration guide: http://www.gpsnavx.com/iNavX/help/seamate1a.htm - FF44 - June 17, 2011 Seamate 1A Lite is now 3 years old, and probably end of life. The drawback is it doesn't mix the two channels, so you have to connect NMEA instruments Channel 2 on TCP Port number:10002 -OR- AIS Channel 1 on TCP Port number:10001. One can find it $400 in US, prohibitive 650 € in France, damned! - GPSNavX - June 17, 2011 Agree. Brookhouse iMux is a much better product and I would advise against the purchase of the Seamate at this point. |