+- MacSailing.net (https://macsailing.net/mybb)
+-- Forum: iPhoneSailing.net (https://macsailing.net/mybb/forum-14.html)
+--- Forum: iNavX (https://macsailing.net/mybb/forum-15.html)
+---- Forum: Tips and Tricks (https://macsailing.net/mybb/forum-23.html)
+---- Thread: NMEA 2000 (/thread-1389.html)
- GPSNavX - March 8, 2011
Connect a SeaSmart WiFi:
Connect the N2K backbone to the SeaSmart WiFi. The backbone will provide provide power.
Once connected, link iNavX to SeaSmart WiFi ..
http://www.gpsnavx.com/iNavX/help/seassmart.htm
----------------------------------------
Connect an Actisense NGW-1 ISO to a Brookhouse iMux:
Blue wire to NMEA CH1,2, or 3 of the iMux B
White wire to NMEA CH1,2, or 3 of the iMux A
If you are using an iPad and have a N2K autopilot:
Black wire to NMEA Differential (RS422) Out of the iMux B
Red wire to NMEA Differential (RS422) Out of the iMux A
Connect NGW-1 ISO to N2K backbone.
Once connected, link iNavX to iMux ..
http://www.gpsnavx.com/iNavX/help/imux.htm
----------------------------------------
Connect an Actisense NGW-1 ISO to a DigitalYacht iAIS or DigitalYacht WLN10:
Blue wire to NMEA In - of the iAIS
White wire to NMEA In+ of the iAIS
Connect NGW-1 ISO to N2K backbone.
Once connected, link iNavX to iAIS ..
http://www.gpsnavx.com/iNavX/help/iais.htm
NOTE: Both the iMux and iAIS can be simultaneously interfaced to a Mac or PC via a USB port. This allows the N2K data (Converted to N0183) to flow to both iNavX and a marine navigation application on a PC or a Mac.