+- MacSailing.net (https://macsailing.net/mybb)
+-- Forum: MacSailing.net (https://macsailing.net/mybb/forum-3.html)
+--- Forum: MacENC & GPSNavX (https://macsailing.net/mybb/forum-5.html)
+--- Thread: Transfering routes to Raymarine C-80 (/thread-435.html)
- nwsailor - January 29, 2008
Has anyone any experience transfering, via a CF card, a route created on GPSNavX to a Raymarine C-80?
The concept seem simple but GPSNavX has three options of transfer to files and I am not sure if any are compatible with the Raymarine system.
Any thoughts or experience?
Thank you
- GPSNavX - January 29, 2008
GPSNavX can transfer waypoints to your Raymarine C-80 over the NMEA serial cable. Set the type to 'Other' in the GPS panel Settings drawer.
If Raymarine can support either the standard GPX or KML format then you might be able to use the CF card to transfer waypoints.
- ReeferJon - January 31, 2008
If the Raymarine expects a file format other than GPX or KML, you could look at GPSBabel, which converts between waypoint formats.
GPSBabel Site