• Welcome to MacSailing.net!
  • Dedicated to sailing!
  • Be Jolly!
Hello There, Guest! Login Register


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Title: Adding bu353s4 to my Mac ,failed
#1
Angry
After several attempts, I even had to reboot , a teck looked at it 
Still does not work 
I received a small disk with the gps , can’t use it
Tried to download the driver from the cie , several time 
I can’t find with USB port it uses to apply it to open Cpn
Help please before I use a hammer and crush that piece of S » » »
Louis
 
Reply
#2
Hi,

I found Francis Fustier's article for installing the BU-353 on a Mac. This article is old but it contains a link to download the Prolific PL2303 USB driver for macOS 10.13.
https://blog.francis-fustier.fr/en/insta...avxmacenc/

It may help if you told us what version of macOS you have and what other application (software package) you are trying to use with the BU-353 in addition to OpenCPN.

Here is the official Prolific download site for their driver on macOS 10.15:
http://www.prolific.com.tw/us/showproduc...29&pcid=41

Prolific added this special note on the installation for macOS 10.13 to 10.15:
"NOTE: Mac OS High Sierra 10.13 introduces a new feature that requires user approval before loading new third-party kernel extensions. Go to System Preferences - Security & Privacy and click Allow."



— —••• •••— —
Jon
 
Reply
#3
…and there is also this post on the subject on MacSailing.net:
http://macsailing.net/mybb/showthread.ph...7#pid11527
 
Reply
#4
Hi 
I have Mac OS high Sierra and plan to use the gps only for open cpn.
I used the high Sierra download ,
My Mac would not open again after the download ,
Had to go to the teck man to reboot without loosing all my files .
I will try it again ,
Thank you Jade .
Happy wind
 
Reply
  


Forum Jump:


Browsing: 1 Guest(s)