1
Posts: 36
Threads: 8
Joined: March 29, 2009
Reputation:
0
As I understand it, "waypoit arrival" is defined as arriving to a circle around the waypoint (red in my image). I'd like to see an option to instead define it as passing a line at half the intersecting angle (green line), as I think this can be more suitable in some cases.
Is this something to add to MacEnc/GPSNavX?
4
Posts: 181
Threads: 7
Joined: July 28, 2005
Reputation:
0
Actually, there exists a NMEA standard for this case and deals with WP arrival ( or WP passed as in your case) by using the perpendicular of the course line
AAM - Waypoint Arrival Alarm
Status of arrival (entering the arrival circle, or passing the
perpendicular of the course line) at waypoint c--c.
$--AAM,A,A,x.x,N,c--c*hh<CR><LF>
| | | | |
| | | | +---------------Waypoint ID
| | | +------------------Units of radius, nautical miles
| | +---------------------Arrival circle radius
| +------------------------Status: A = perpendicular passed at waypoint
+--------------------------Status: A = arrival circled entered
4
Posts: 181
Threads: 7
Joined: July 28, 2005
Reputation:
0
sorry, that didn't format correctly, see attached .png for the correct sentence format...
1
Posts: 36
Threads: 8
Joined: March 29, 2009
Reputation:
0
Thanks for your insight, but I was mainly targeting how it works within MacENC when following a route with Auto Next (yes, I meant WP passed), so it's not exactly involving NMEA.
I think my handheld Garmin Etrex gps works as I described.
4
Posts: 181
Threads: 7
Joined: July 28, 2005
Reputation:
0
What happens if you're on the on the "outside" of your turn?
It is also worth considering the basic difference between an arrived at WP and a missed WP. An arrived at WP and it's corresponding circle means you've been able to navigate a previously laid out course that avoided hazards and or danger and Auto Next would continue that. A missed WP means all bets are off and whatever method you chose to deal with a missed WP it's probably not a good idea to have Auto Next kick in as a result.
1
Posts: 36
Threads: 8
Joined: March 29, 2009
Reputation:
0
On the outside of the turn the same rule would apply - half intersecting angle. See it as the green line continues on the other side of the WP.
I find that for example when creating a route to navigate along a coast with few obstacles (mostly to be able to see remaing distance and ETA and not so much to navigate after), "half intersecting angle" would be much more useful than a circle since the waypoints can safely be passed at rather large distance, and making the circle larger to compensate for this would make it arrive to the WP too early.
I'm not suggesting that MacENC/GPSNavX default behavior should change, I'm just suggesting this alternate behavior for WP arrival/WP passed as an option.
1
Posts: 36
Threads: 8
Joined: March 29, 2009
Reputation:
0
I guess this is a case of having the map adjust to reality automatically instead of having to take steps such as advancing to the next waypoint manually or even to move the WP... I don't want to interact with the computer more than necessary while I'm busy sailing, I just want it to follow and adjust to reality in a (to me) intelligent manner so I can glance quickly at the display and not get crazy readings like when it's still trying to bring me to a waypoint that we passed half an hour ago, but happened to pass the WP just a little bit too far away because we tacked a bit off route...
As I think more of this, I think it could be relevant to always use half intersecting angle as "waypoint approach" condition, but in combination with a distance circle. To cover my needs I could set a fairly large circle radius (purple in my updated illustration, I tried to get it to show inline without success) if the conditions permit, but still take advantage of the "half intersecting angle" to not reach the waypoint too early. Best of both...
I haven't looked too close at SailTimer yet, but I'm not sure how it would cover these needs. It seems to be more aimed at windward optimization.