May 4, 2005 08:15
Only one app at a time can look at the same USB/Serial port.
You could do something like this..
Have the NMEA data come into GPSNavX first. Then select the "Repeat" check box on the GPS Settings drawer on the GPS panel. This will enable the NMEA data to be repeated to a new port. The new port then could be looped back to another USB to serial adapter which Rusulkasoft could use. Basically you are creating a multiplexor here.
Or you could buy a USB multiplexor..
http://www.shipmodul.com/en/miniplex-42usb.html
You could do something like this..
Have the NMEA data come into GPSNavX first. Then select the "Repeat" check box on the GPS Settings drawer on the GPS panel. This will enable the NMEA data to be repeated to a new port. The new port then could be looped back to another USB to serial adapter which Rusulkasoft could use. Basically you are creating a multiplexor here.
Or you could buy a USB multiplexor..
http://www.shipmodul.com/en/miniplex-42usb.html
Scott Dillon
Sydney Australia
North Shore 38
CYCA
Sydney Australia
North Shore 38
CYCA