May 18, 2005 14:35
First off congrats on being able to run OS X 10.3 and GPSNavX on a 300 MhZ G3!! I have to imagine the performance is painfully slow.
Yes GPSNavX can read GPS data from one port (your serial port) and AIS data from your USB port via the Keyspan Adapter.
You will want to configure the AIS panel settings such that the port
is /dev/USA-XXXX
and the rate is
38400
Make sure you install the Keyspan OS X driver software.
No NMEA data will be available until you are in range on vessels that have AIS transponders. AIS creates allot of NMEA data and will certainly put a burden on your G3.
Yes GPSNavX can read GPS data from one port (your serial port) and AIS data from your USB port via the Keyspan Adapter.
You will want to configure the AIS panel settings such that the port
is /dev/USA-XXXX
and the rate is
38400
Make sure you install the Keyspan OS X driver software.
No NMEA data will be available until you are in range on vessels that have AIS transponders. AIS creates allot of NMEA data and will certainly put a burden on your G3.
Scott Dillon
Sydney Australia
North Shore 38
CYCA
Sydney Australia
North Shore 38
CYCA