October 6, 2011 10:24
1. PolarCOM defaults to a single instrument panel which you can resize - this is likely what you see (it should not be blank, but I can't tell for sure without seeing your screen).
You can define an arbitrary number of additional instrument panels as necessary.
2. PolarCOM is pre-configured to autodetec an NMEA 0183 GPS device. This works for most USB (really, serial) GPS devices. If it does not - you can always configure GPS manually as described here:
http://support.polarnavy.com/knowledgeba...article=21
3. Once PolarCOM has instrument data, PolarView needs to be connected to PolarCOM by using menu option Ship->Connect to PolarCOM
Additional documentation can be found here:
http://www.polarnavy.com/help/pvhelp_m.html
You can define an arbitrary number of additional instrument panels as necessary.
2. PolarCOM is pre-configured to autodetec an NMEA 0183 GPS device. This works for most USB (really, serial) GPS devices. If it does not - you can always configure GPS manually as described here:
http://support.polarnavy.com/knowledgeba...article=21
3. Once PolarCOM has instrument data, PolarView needs to be connected to PolarCOM by using menu option Ship->Connect to PolarCOM
Additional documentation can be found here:
http://www.polarnavy.com/help/pvhelp_m.html