• Welcome to MacSailing.net!
  • Dedicated to sailing!
  • Be Jolly!
Hello There, Guest! Login Register


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Title: Lowrance iFinder H20
#1
Anybody have any luck connecting a Lowrance iFinder H20 C to MacENC? I "think" I have the serial adapter working, but I'm not getting any NMEA data. I'm unsure of the various setting.
 
Reply
#2
Reading the manual here..

http://www.lowrance.com/Manuals/Files/iF...101805.pdf

pages(PDF Pages) 14(22), 67(75) show how to configure NMEA. You want the GPS to send NMEA out at 4800.

You would plug the NMEA serial connector to the Keyspan High speed serial adapter cable. Launch MacENC. Select "Connect" on the "GPS" menu, Select "Settings..." button, Select type as "Other", Port as "/dev/cu.KeySerial1" and rate as "4800". If you do not see a port listed as "/dev/cu.KeySerial1" then that means you have not installed the OS X driver for the Keyspan adapter.

Visit www.keyspan.com to find the driver.
Scott Dillon
Sydney Australia
North Shore 38
CYCA
 
Reply
  


Forum Jump:


Browsing: 1 Guest(s)