June 23, 2012 11:04
The SailTimer Wind Vane is compatible with MacENC.
1) Connect to the SailTimer Wind Vane by using the Airport menu in the upper right hand corner of the menu. The selection will be "SailTimerWindVane.com".
2) Launch MacENC.
3) Select "TCP/IP" from the "GPS" menu.
4) Select "UDP" for Mode.
5) Enter Port: 55554
6) Select "Enable".
7) Select "Preferences" from the "MacENC" menu.
8) Set "Wind" to "Apparent" in the "Instruments" section.
9) Select "Connect" on the "Instruments" panel.
If all is working "AWA:" and "AWS:" will be displayed in the "Instruments" panel.
1) Connect to the SailTimer Wind Vane by using the Airport menu in the upper right hand corner of the menu. The selection will be "SailTimerWindVane.com".
2) Launch MacENC.
3) Select "TCP/IP" from the "GPS" menu.
4) Select "UDP" for Mode.
5) Enter Port: 55554
6) Select "Enable".
7) Select "Preferences" from the "MacENC" menu.
8) Set "Wind" to "Apparent" in the "Instruments" section.
9) Select "Connect" on the "Instruments" panel.
If all is working "AWA:" and "AWS:" will be displayed in the "Instruments" panel.
Scott Dillon
Sydney Australia
North Shore 38
CYCA
Sydney Australia
North Shore 38
CYCA