May 31, 2010 06:20
A few points.
1) Make sure that the data tx wire from the USB to serial adapter is connected.
2) Make sure the type is set to "Other" in the GPS panel Settings drawer.
3) Try transferring some waypoints.
4) It is possible the Raymarine C90 does not support the $GPRTE NMEA message.
1) Make sure that the data tx wire from the USB to serial adapter is connected.
2) Make sure the type is set to "Other" in the GPS panel Settings drawer.
3) Try transferring some waypoints.
4) It is possible the Raymarine C90 does not support the $GPRTE NMEA message.
Scott Dillon
Sydney Australia
North Shore 38
CYCA
Sydney Australia
North Shore 38
CYCA