[Cirruscloud]

I'm using MAC Enc with a Comar AIS-2-USB receiver with a dedicated antenna. I can't seem to get mac Enc to recognize the receiver. I selected, AIS connect at startup. Selected 38400, use instruments port, its not giving me the option for usbserial port unless the GPS is plugged in. I'm also getting the message, "Unable to open port, usbserial" The monitor drawer for the AIS is reading $GPGSA sentences and gives the yellow dot.

When the GPS is unplugged I get the Red Dot and no sentences.

All the lights are working on the receiver, the green power light is on, and the red Channel A and B are flashing.

dkall mentioned that he installed all the current drivers from Comar. Which is strange to me because the CD that was included with the receiver only has windows drivers on it.

Any help would be appreciated!

Thanks in advance,

Brennan