December 17, 2012 13:33
I installed the FTDIUBSerialdriver-v2-1-10-dmg driver that came on the MiniPlex-2UB disk that came with the multiplexer before I connected the USB cable to my mac.
I opened GPSNavX and then the GPS Panel and the Instruments Panel.
On the GPS Panel, I chose the following: Type - Garmin; Port - MiniPlex-21001293; and Rate - 38400. The GPS did not connect.
On the Instruments Panel, I chose the following: checked the Use GPS Port; Port - MiniPlex-21001293; and Rate - 38400. Again, there was no connection.
The MiniPlex shows up in both panels but the red dot shows no connection.
In my System Preferences panel, under Network, USB-Serialcontroller shows as a modem and as not connected.
Any ideas?
Gary
I opened GPSNavX and then the GPS Panel and the Instruments Panel.
On the GPS Panel, I chose the following: Type - Garmin; Port - MiniPlex-21001293; and Rate - 38400. The GPS did not connect.
On the Instruments Panel, I chose the following: checked the Use GPS Port; Port - MiniPlex-21001293; and Rate - 38400. Again, there was no connection.
The MiniPlex shows up in both panels but the red dot shows no connection.
In my System Preferences panel, under Network, USB-Serialcontroller shows as a modem and as not connected.
Any ideas?
Gary