April 21, 2010 18:26
Covered in the MacENC help accessed on the "Help" menu or linked here..
http://www.gpsnavx.com/MacENC/help/connectinggps.htm
1) Install Keyspan driver as linked above
2) Plug in Keyspan adapter
3) Re-start MacENC
4) Select "Connect" on the "GPS" menu
5) Select Port KeySerial1, Rate most likely 4800, Type Other
The UTC field in the GPS panel will update when the connection is made.
It is important that you are connecting to NMEA-0183 data on the Raymarine.
http://www.gpsnavx.com/MacENC/help/connectinggps.htm
1) Install Keyspan driver as linked above
2) Plug in Keyspan adapter
3) Re-start MacENC
4) Select "Connect" on the "GPS" menu
5) Select Port KeySerial1, Rate most likely 4800, Type Other
The UTC field in the GPS panel will update when the connection is made.
It is important that you are connecting to NMEA-0183 data on the Raymarine.
Scott Dillon
Sydney Australia
North Shore 38
CYCA
Sydney Australia
North Shore 38
CYCA