1
Posts: 17
Threads: 3
Joined: April 17, 2007
Reputation:
0
Untill now it is only possible to transfer routes and waypoints to garmin and magellan and "other" protocols. Would very much appreciate it if you could do the same for the Nexus Marine Nx2 hardware. If you need any help I have an intel mini onboard with the Nx2 system (GPS, Autopilot, wind, log and depth and server) so I can help with testing and getting you info on the nmea sentence needed.
rgds
Frank
5
Posts: 1,947
Threads: 284
Joined: April 22, 2005
Reputation:
0
The Nexus NX2 should be able to accept reception of the $GPWPL and $GPRTE NMEA messages as the "Other" Type: selection in the GPS panel Settings supports.
Scott Dillon
Sydney Australia
North Shore 38
CYCA
1
Posts: 17
Threads: 3
Joined: April 17, 2007
Reputation:
0
mmm.... I have tried that but to no avail sofar, however will give it a go again. Will keep you posted.
cheers
Frank
5
Posts: 1,947
Threads: 284
Joined: April 22, 2005
Reputation:
0
Are you using a Keyspan USB to serial adapter to connect your Mac to your NX2 server? Make sure you have enabled the $IIWPL and $IIRTE NMEA messages for reception. You can confirm that $IIWPL is enabled for transmission by activating a waypoint on the NX2 and MacENC should pick it up as the active waypoint. The active waypoint from the NX2 will be displayed in the GPS panel Waypoint drawer.
Scott Dillon
Sydney Australia
North Shore 38
CYCA
1
Posts: 2
Threads: 1
Joined: June 27, 2007
Reputation:
0
GPSNavX
If $IIWPL proves not to be enabled, can you advise on what to do to enable it? I'm having the same issues with a Raymarine C70, which, I understand, should work with the Keyspan USB through Raymarine's NMEA/seatalk multiplexer.
Thanks,
Palio
