1
Posts: 5
Threads: 4
Joined: March 19, 2012
Reputation:
0
I have a E90 W Raymarine chartplotter, a miniplex 2 wi Ship Module multiplexer and a Mac Enc software with Navionics charts. The question is: Can I built routes and way points with the Mac Enc and transfer them to the chart plotter?
5
Posts: 1,947
Threads: 284
Joined: April 22, 2005
Reputation:
0
Using the USB connection to the Miniplex-2Wi, waypoints should transfer over. Set Type to "Other" in the GPS panel Settings drawer and select the port USBSerial-XXXX, Rate 4800. You will need to install the FTDI driver linked here..
http://www.shipmodul.com/en/downloads.html
Be sure to re-start Mac after doing so.
Scott Dillon
Sydney Australia
North Shore 38
CYCA
1
Posts: 1
Threads: 0
Joined: April 7, 2010
Reputation:
0
Hi, I have an ST80 system on board and have just purchased an iMUXst multiplexer. Will I be able to transfer waypoints from my MacBook or iPAD to the Raymarine network?
5
Posts: 1,947
Threads: 284
Joined: April 22, 2005
Reputation:
0
Yes you can transfer waypoints from iPad using the "Transfer" button in the iNavX TCP/IP NMEA Client view.
Yes you can transfer waypoints from Mac using a USB connection to the Brookhouse iMuxSt using the "Transfer" menu item on the "Waypoints" menu in MacENC/GPSNavX.
Scott Dillon
Sydney Australia
North Shore 38
CYCA