• Welcome to MacSailing.net!
  • Dedicated to sailing!
  • Be Jolly!
Hello There, Guest! Login Register


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Title: NavX, a G4 Titanium, and?...
#1
I have a Mac G4 Titanium, on which I've installed NavX and the BBS East Coast (USA) charts from the available dvd. Using the Keyspan serial adapter, I've been trying to sync up an admittedly very old Garmin 12XL, but it's not being recognised. Is this a case of the firmware in the handheld simply being too antiquated for the Mac and/or NavX to recognize it? I did follow Garmin tech's instructions about setting up the system configurations, etc. But, still nothing. (Note that I'm an electronics dummy, so any suggestions of soldering the freem wire to the flux capacitor, bypassing the hamalstaf valve, will be met with a blank 'huh?' look on my face...)

Would the USB 'hockey puck' unit available direct from NavX work with this set-up? Anyone familiar with it?

Sincere thanks, --DS
 
Reply
#2
Make sure you install the Keyspan OS X driver for your version of OS X.

Keyspan Drivers

Plug the Keyspan adapter in to your Mac's USB port

Plug the Garmin GPS into the Keyspan adapter

Make sure your Garmin GPS is in and set to transmit NMEA out

Start GPSNavX

Select "Connect" on the "GPS" menu

Select "Settings" button to open the Settings drawer

Select type 'Garmin'

Select port /dev/cu.KeySerial1

Select rate 4800

You should then see the UTC field of the GPS panel updated


If you don't want to mess around with all this then order the BU-353 USB GPS..

BU-353 UBS GPS
Scott Dillon
Sydney Australia
North Shore 38
CYCA
 
Reply
  


Possibly Related Threads…
Thread Author Replies Views Last Post
  Confused on RADAR w/MacENC and GPS navX captmorgan23 7 10,835 August 4, 2011 11:48
Last Post: GPSNavX

Forum Jump:


Browsing: 1 Guest(s)